| Scheduled Conference | Title | |
| 6th Symposium on Engineering Sciences | Parametric investigation of production of biofuels at a pilot plant facility | Abstract |
| Muhammad Tayyeb Javed | ||
| 2nd International Conference on Engineering Sciences | Particulate Matter Levels in Lahore City: Measurement and Modeling | Abstract |
| Waqas Majeed, Mahmood Saleem | ||
| Third International Conference on Engineering Sciences | Performance Comparison of Absorption Based Pre-Combustion CO2 Capture Technologies | Abstract |
| Usama Shakil, Rameez Ajaz, Muhammad Zaman | ||
| Third International Conference on Engineering Sciences | Performance Enhancement of Acid Gas Removal Systems | Abstract |
| Khurram Saleem, Ali Zulqarnain Khan | ||
| 6th Symposium on Engineering Sciences | Performance improvement of organic phosphate based flame retardant chemical for cellulose | Abstract |
| Haji Ghulam Qutab | ||
| Third International Conference on Engineering Sciences | Physio-chemical evaluation and thermal degradation study of torrefied biomass | Abstract |
| Umair Aslam, Naveed Ramzan | ||
| 2nd International Conference on Engineering Sciences | Plant Operational Reliability Assessment Using Dynamic Simulation | Abstract |
| Iftikhar Ahmad Kirmani | ||
| 2nd International Conference on Engineering Sciences | Plant Operational Reliability Assessment Using Dynamic Simulation | Abstract |
| Asim Ur Rehman | ||
| 2nd International Conference on Engineering Sciences | Potential for sugar Industry by products/wastes utilization | Abstract |
| Abdullah Khan Durrani, Sajjad Ahmad wainse | ||
| 6th Symposium on Engineering Sciences | Potential of CO2 bio-fixation by microalgae culturing in closed photobioreactors: Advancement towards addressing global environmental challenge | Abstract |
| Muhammad Ilyas | ||
| Third International Conference on Engineering Sciences | Preparation, Property and Cost Estimation of Different Liquid Soap Samples Prepared from Different Fatty Acids | Abstract |
| Fahad Oun Khokhar, Junaid Khan, Ahmad Ali, Muhammad Abdullah, Omer Waheed | ||
| 6th Symposium on Engineering Sciences | Process Intensification in Heat-Integrated Distillation Columns | Abstract |
| Kanwal Shabbir, Sadaf Javed, Ammarah Hasan, Muhammad Faheem | ||
| 6th Symposium on Engineering Sciences | Process Intensification in Vapor Recompression Distillation | Abstract |
| Maria Jafar Khan, Kanwal Shabbir, Naveed Ramzan, Muhammad Faheem | ||
| 2nd International Conference on Engineering Sciences | Process Safety: State-of-Play, Current and Future Challenges [Invited Talk] | Abstract |
| Naveed Ramzan | ||
| Third International Conference on Engineering Sciences | Production & Comparative study of Tyre Oil under the Processes of Slow & Fast Pyrolysis and Studying the Effect of Catalyst on Production of Oil | Abstract |
| Azam Mehmood Dar | ||
| Third International Conference on Engineering Sciences | Production of Bio-oil from Co-Pyrolysis of Organic Solid Waste | Abstract |
| Muhammad Hassan Qasim, Najaf Ali, Waqar Ali Khan, Shahid Raza Malik | ||
| 2nd International Conference on Engineering Sciences | Production of Coal Binder by Pyrolysis of Coal | Abstract |
| Faheem Raza, Muhammad Farooq Bashir, Noraiz Hayat Abbasi, Muhammad Asim Ghaffar, Rafi Ullah Khan | ||
| Third International Conference on Engineering Sciences | Production of coal briquettes from Pakistani coal fines by blending with indian starch based binder and molasses. | Abstract |
| Qazi Mohammed Omar, Majid Moein Sabri, M. Ehtisham Javed, Sami ul Haq, Javeed A. Awan | ||
| Third International Conference on Engineering Sciences | PRODUCTION OF HYDROGEN FROM BIO-ETHANOL VIA STEAM REFORMING | Abstract |
| Muhammad Tehsin Ul Haq | ||
| Third International Conference on Engineering Sciences | Production, Properties & Scope of BioPlastics | Abstract |
| Hafisa Ayesha Nawaz, Ifrah Akhtar, Tanveer Fatima, Nabeela Shahzadi, Umme Laila Baloch | ||
| 5th Symposium on Engineering Sciences | Prospect of Iran Natural Gas Export Projects | Abstract |
| hedayat omidvar | ||
| Third International Conference on Engineering Sciences | proximate analysis of pakistani coal & biomass, and blending of coal with biomass using heat balance method for estimating its potential for energy generation | Abstract |
| Junaid Khan, Muhammad Ali, Faraz Zahid, Sidra Ijaz Khan, Muhammad Zahoor | ||
| 5th Symposium on Engineering Sciences | Proximate and Calorific Value Analysis of Selected Combustible Industrial Waste | Abstract |
| Muhammad Danyal, Muhammad Junaid, Muhammad Rizwan, Mahmood Saleem | ||
| 5th Symposium on Engineering Sciences | Proximate and Heating Value analysis of selected Indigineous Agri Wastes | Abstract |
| Mahmood Saleem, Abid Hussain, Hafiz Asad Masood, Qasim Zia Butt, Mubashir Riaz Khan | ||
| Third International Conference on Engineering Sciences | Pyrolysis: An Experimental Setup for the Synthesis of Furfural through various Biomasses in Fixed Bed Reactor | Abstract |
| Mahmood Saleem, Nazia Baig | ||
| 6th Symposium on Engineering Sciences | Reaction Mechanism of Ethylene Glycol Reforming on Pt(111) in Vapor and Aqueous Phases | Abstract |
| Muhammad Faheem, Andreas Heyden | ||
| Third International Conference on Engineering Sciences | Reactor Dynamics and Control of a Methanol Autothermal Reformer | Abstract |
| Anees Ahmad, Naveed Ramzan, Muhammad Faheem | ||
| 5th Symposium on Engineering Sciences | Recent Advances in Transmission Electron Microscopy (TEM) Specimen Preparation | Abstract |
| Dr Aqil Inam | ||
| 6th Symposium on Engineering Sciences | Reclamation of Lubricating Oil by using modified Activated Acid Clay Method | Abstract |
| Muhammad Nauman Mumtaz, Hassaan Amer, Ali Shawaiz | ||
| Third International Conference on Engineering Sciences | Recovery of Lubricating Oil by Acid Treatment | Abstract |
| Saad Aziz, Shaheer khan, Rana Tanveer Ashraf, Junaid Khan | ||
| 6th Symposium on Engineering Sciences | RECYCLING OF WASTE WATER FROM FLOUR MILL | Abstract |
| umair arshad, Dr. Muhammad Suleman Tahir, Dr Muhammad Sagir, Zafar Shakoor | ||
| Third International Conference on Engineering Sciences | Redesigning of Process Condensate Treatment Section | Abstract |
| Mehmood Gilani, Mahmood Saleem, Luqman Hakeem, Arslan Shafqat, Arsalan Hussain, Tayyab Ahmad | ||
| 5th Symposium on Engineering Sciences | Regeneration of Anionic Exchange Resin used in Hexavalent Chromate Removal | Abstract |
| WAQAR ALI KHAN | ||
| 5th Symposium on Engineering Sciences | Relief Load Calculation to Mitigate Overpressure Scenarios Caused by Operational Upsets to Finalize the Relief Valve Size and Flare System Along With Case Study of Strippers | Abstract |
| Yasir Nadeem, Zahid Mahmood | ||
| 6th Symposium on Engineering Sciences | REMOVAL OF AMMONIUM NITRATE FROM LEACHATE BY CHEMICAL PRECIPITATION | Abstract |
| Kamran Hassan, M S Tahir, Muhammad Sajid, M Sagir, Saba Afzal | ||
| 5th Symposium on Engineering Sciences | Removal of Anionic Dyes from Textile Waste Water by Modified Cationic Starch | Abstract |
| Hafiz Muhammad Aamir, Rafi Ullah Khan | ||
| 5th Symposium on Engineering Sciences | Removal of formaldehyde present in Volatile Organic Compounds (VOC) of pulp and paper industry | Abstract |
| Muhammad Shahbaz, Malik Zeeshan, Kaleem azher, Muhammad Suleman Tahir, Abdul Hannan | ||
| Third International Conference on Engineering Sciences | Removal of lead (Pb+2) from waste water by adsorption using graphitic adsorebent | Abstract |
| Mubeen khalid, Faseeh Mustafa, Nabeel Asad, Muaaz Farooq | ||
| 6th Symposium on Engineering Sciences | Removal of Suspended Solid and turbidity from Wastewater Using Natural and Primary Coagulant | Abstract |
| WAQAR ALI KHAN | ||
| 6th Symposium on Engineering Sciences | Removal of Suspended Solid and turbidity from Wastewater Using Natural and Primary Coagulant | Abstract |
| Shoab Zaheer, WAQAR ALI KHAN, Najaf Ali, Shahid Raza Malik | ||
| 5th Symposium on Engineering Sciences | Removal of Thiosulfate from Aqueous Solution via Hydrogen Peroxide (H2O2) Advance Oxidation Process (AOP) with Ferric Oxide (Fe2O3) Catalyst | Abstract |
| Riaz ud Din, Saeed Gul | ||
| Third International Conference on Engineering Sciences | RENEWABLE PHENOL PRODUCTION FROM OIL PALM SHELL WASTE BIOMASS BY MICROWAVE ASSISTED PYROLYSIS AT 2.54 GHZ | Abstract |
| Muhammad Najam Khan | ||
| 2nd International Conference on Engineering Sciences | Review of Gears Failure Modes | Abstract |
| Fayyaz Fayyaz | ||
| 5th Symposium on Engineering Sciences | SCALE UP OF HOLLOW FIBER MEMBRANE CONTACTOR FOR COPPER RECOVERY FROM WASTE WATER | Abstract |
| Iftilhar Ahmad, Mohammad YOUNAS | ||
| 5th Symposium on Engineering Sciences | Scanning Electrochemical Microscopy: A new way forward to identify and quantify regions of different electrochemical activity at high velocity oxyfuel sprayed Inconel 625 coatings | Abstract |
| Akbar Niaz Butt | ||
| 6th Symposium on Engineering Sciences | Secondary Side Deposit Built-up (Sludge Pile) in Steam Generator of K-1: Lab Test Investigation | Abstract |
| Qasim Zia Butt | ||
| 6th Symposium on Engineering Sciences | Silver Plating of Copper from Non-Cyanide Baths | Abstract |
| Mohsin Ali Raza, Sana Ayub, Nosheen Maryam Awan, Faizan Ali Ghauri, Bakhtawar Shahid Parvaiz, Rafiq Ahmad | ||
| Third International Conference on Engineering Sciences | SIMULATION AND MODELLING OF PAKISTANI COAL GASIFICATION PLANT FOR SYNTHESIS OF AMMONIA | Abstract |
| Fahad Oun Khokhar, Muhammad Ali, Rizwan Shiekh, Omer Waheed, Zain Akhtar, Rabya Aslam | ||
| Third International Conference on Engineering Sciences | Simulation and Modelling of Sweetning of Natural Gas | Abstract |
| Muhammad Rauf Maqsood, Mateen Tariq, Usman Siddique | ||
| 6th Symposium on Engineering Sciences | SIMULATION OF FURNACE FOR COAL SLURRY FUEL COMBUSTION ON COMPUTATIONAL FLUID DYNAMICS | Abstract |
| Mehboob Alam, Dr. Muhammad Suleman Tahir, Dr. Sajjad Miran, Naila Amin | ||
| 151 - 200 of 245 Items | << < 1 2 3 4 5 > >> | |