| Scheduled Conference | Title | |
| Third International Conference on Engineering Sciences | A CASE STUDY OF LINE BALANCING USING RANKED POSITION WEIGHT (RPW) METHOD IN A MANUFACTURING INDUSTRY | Abstract |
| Muhammad Ayat, Tabish Sarfraz, Ahmed Elmahi, Mutahira Ilyas | ||
| 2nd International Conference on Engineering Sciences | A Comparative Analysis of Forward and Inverse Kinematics of Robotic Manipulator | Abstract |
| Kamal Shahid | ||
| 6th Symposium on Engineering Sciences | A Comparative Study of Kinetic Rate Models for the Dehydrogenation Reaction of Methylcyclohexane | Abstract |
| Muhammad Sarfraz Akram | ||
| 6th Symposium on Engineering Sciences | A Simulation Approach to Investigate the Effect of Liquid Film Rings on Drying Performance | Abstract |
| Hafiz Tariq Mahmood, Saqib Javed | ||
| Third International Conference on Engineering Sciences | A Study of Effect of Feed Size and Catalyst on Conversion of Agricultural Biomass Using Fast Pyrolysis Process | Abstract |
| Hafiz Muneeb Ahmad Shafique, Mahmood Saleem | ||
| Third International Conference on Engineering Sciences | A Study of Sedimentation of rod like particles | Abstract |
| Adnan Hamid, Samia Mehdi, Atta Ullah, Muhammad Nadeem | ||
| Third International Conference on Engineering Sciences | A study on torrifaction and step pyrolysis of agriculture waste | Abstract |
| Muhammad Tayyeb Javed | ||
| Third International Conference on Engineering Sciences | Adsorption Measurement using Magnetic Suspension Balance – Pure and Selective Adsorption | Abstract |
| Muhammad Mujahid Rafique | ||
| 2nd International Conference on Engineering Sciences | Adsorption of Congo red Dye from Aqueous Solution using Low Cost Adsorbents | Abstract |
| Sharjeel Waqas, Muhammad Nawaz, Muhammad Usman Tahir | ||
| 6th Symposium on Engineering Sciences | Adsorptive Removal of Organic Dyes from Water by using Metal Organic Frameworks | Abstract |
| MUHAMMAD USMAN | ||
| 6th Symposium on Engineering Sciences | Adsorptive removal of Rhodamine B from aqueous solution using carbonaceous material derived from Lawny Grass | Abstract |
| Ahmed Abdullah | ||
| 6th Symposium on Engineering Sciences | Advanced Membranes based on Intrinsically Conducting Polymers | Abstract |
| Asif Ali Qaiser | ||
| 2nd International Conference on Engineering Sciences | Advanced Monte Carlo Modeling of PWR Using MCBEND | Abstract |
| Muhammad Naveed Khan | ||
| 6th Symposium on Engineering Sciences | Advanced Oxidation Process for Degradation of Pharmaceutical Waste | Abstract |
| Shagufta Ishtiaque | ||
| 2nd International Conference on Engineering Sciences | Advances In off gas Purification [Invited Talk] | Abstract |
| Muhammad Suleman Tahir | ||
| 5th Symposium on Engineering Sciences | An Innovative Reaction Model Determination Methodology in Solid State Kinetics based on Variable Activation Energy | Abstract |
| Muhammad Azeem Arshad | ||
| 2nd International Conference on Engineering Sciences | AN OVERVIEW OF THE SPECTRUM SENSING TECHNIQUES IN COGNITIVE WIRELESS SENSOR NETWORKS | Abstract |
| Muhammad Tahir Mushtaq | ||
| Third International Conference on Engineering Sciences | Anodizing of Zirconium-2 alloy and its use in dental implants | Abstract |
| Ameeq Farooq, Usama Bin Ali, Muhammad Ahsan, Rafiq Ahmad | ||
| 2nd International Conference on Engineering Sciences | Assessment of leadership value & action trait of Safety Culture program in Pakistan Research Reactors | Abstract |
| Muhammad BURHAN UD DIN | ||
| Third International Conference on Engineering Sciences | Barrier Properties of Metalized and non-metalized Packaging Films | Abstract |
| Shagufta Ishtiaque, Muhammad Faisal Akhter, Haseeb Hassan, Amjad Saleem | ||
| 6th Symposium on Engineering Sciences | Barriers to energy efficient design in industrial projects | Abstract |
| Saqib Sajjad | ||
| Third International Conference on Engineering Sciences | BET, FTIR and Raman Study of Carbon from Waste Material | Abstract |
| Rizwan Ali, Dr H.M zaheer Aslam, Aamir Abbas | ||
| 2nd International Conference on Engineering Sciences | Bioactive Materials for Regenerative Medicine [ Keynote Lecture by Prof. Dr. Ihtesham ur Rehman from UK] | Abstract |
| Ihtesham ur Rehman | ||
| 5th Symposium on Engineering Sciences | Biodiesel as an alternate fuel and its initiatives in Pakistan | Abstract |
| Rida Zahra Rizvi, Basit Ghauri | ||
| 2nd International Conference on Engineering Sciences | Biomass Gasification Technology a Fuel Source for I.C. Engines | Abstract |
| Sadiq Hussain | ||
| 6th Symposium on Engineering Sciences | Bio-oil from Co-Pyrolysis of Organic Solid Waste | Abstract |
| Hassan Qasim, Najaf Awan, Waqar Ali Khan, Shahid Raza Malik | ||
| Third International Conference on Engineering Sciences | CAN PLANT REVAMP PROJECT: A Success Story | Abstract |
| Furqan Nasir | ||
| Third International Conference on Engineering Sciences | Carbon dioxide (CO2) Capture: Advancement in technology and design | Abstract |
| Mohammad YOUNAS | ||
| 6th Symposium on Engineering Sciences | Carbon dioxide Removal from Natural Gas Using Hollow Fiber Membrane Contactors: Experimentation, Modeling and Simulation | Abstract |
| Mohammad YOUNAS | ||
| Third International Conference on Engineering Sciences | CATALYSIS FOR LOW TEMPERATURE METHANE CONVERSION TO METHANOL (A REVIEW) | Abstract |
| Yusra Shahid, Muhammad Nauman Rashid | ||
| Third International Conference on Engineering Sciences | Catalytic degradation of Low Density Polyethylene (LDPE) into fuel oil on pilot scale: Designing and manufacturing of coal furnace and using CaC2 as a catalyst | Abstract |
| Syed Fawad Ali Shah | ||
| Third International Conference on Engineering Sciences | Catalytic Fast Pyrolysis of Biomass to Produce Bio Oil | Abstract |
| Muhammad Waqas Ajmal, Mahmood Saleem | ||
| Third International Conference on Engineering Sciences | CFD simulation of heat transfer through an assembly of thin vertical cylinders | Abstract |
| Atta Ullah, Faisal Shafiq, Adnan Hamid, Muhammad Nadeem, Mansoor H Inayat | ||
| Third International Conference on Engineering Sciences | Challenges in Particle Filtration | Abstract |
| Gernot Krammer, F. Holzinger | ||
| Third International Conference on Engineering Sciences | Characterization of stones used in Dado Ornamentation from Asif Khan Tomb, Lahore-Pakistan | Abstract |
| Dr. SAIMA GULZAR | ||
| 6th Symposium on Engineering Sciences | CHEMICAL DE-SCALEING OF BOILER AND EFFECT OF ACID CONCENTRATION ON SCALE | Abstract |
| afaq hassan, Dr muhammad Suleman Tahir, Dr muhammad Sagir, Dr salmn Haider | ||
| Third International Conference on Engineering Sciences | Chlor-Alkali Industry in Pakistan- Technology Advancements, Sustainability and Future Prospective | Abstract |
| Zubair Qamar | ||
| 2nd International Conference on Engineering Sciences | Chloride-induced-corrosion of steel bars embedded in concrete: A review | Abstract |
| Anwar Khitab | ||
| Third International Conference on Engineering Sciences | Cloning and expression of an enantioselective Esterase gene from Endophytic Bacteria, that can help in achieving highest grade of purity | Abstract |
| Zahid Hussain | ||
| 2nd International Conference on Engineering Sciences | CO2 foam for CO2 mobility control using a unique surfactant structure for EOR Applications | Abstract |
| Dr. Muhammad Sagir, Muhammad Suleman Tahir | ||
| 6th Symposium on Engineering Sciences | Coal Fired Power Plants at Pakistan for Energy | Abstract |
| Muhammad Suleman Tahir | ||
| Third International Conference on Engineering Sciences | Coal Gasification | Abstract |
| Khurram Saleem, Irfan Ullah Khan, Zainab Mazhar | ||
| 2nd International Conference on Engineering Sciences | Commercialization of Chemical Engineering Practices [ Invited Talk] | Abstract |
| Nazakat Ali | ||
| 5th Symposium on Engineering Sciences | comparative review of open source free process simulation softwares | Abstract |
| Muhammad Shoaib, walter woukovits, seed gul | ||
| Third International Conference on Engineering Sciences | Comparative study on the effect of acid gas cleaning by MDEA vs (MDEA + Piperazine) as a solvent using Aspen Hysys. | Abstract |
| Naveed Islam, muddasar Habib | ||
| Third International Conference on Engineering Sciences | Comparison of Conversion of Tap water to Mineral Free Water using Ion Exchange and Reverse Osmosis Methods | Abstract |
| Waqar Azhar | ||
| 6th Symposium on Engineering Sciences | Competitive adsorption of cationic and anionic dye from an aqueous solution: Equilibrium isotherm analysis in a single and binary system | Abstract |
| Muhammad Imran Akbar, Muhammad Zaheer, Muhammad Ayyub Khawar, Irfan Yousaf | ||
| 5th Symposium on Engineering Sciences | Computational Fluid Dynamics Simulation of Hollow Fiber Membrane Contactor for Liquid-Liquid Extraction | Abstract |
| Amir Muhammad, Mohammad YOUNAS | ||
| 2nd International Conference on Engineering Sciences | Computational heterogeneous catalysis at a metal–water interface [Invited Talk] | Abstract |
| Muhammad Faheem | ||
| 6th Symposium on Engineering Sciences | Concerns over formation of nitrosamines and nitramines during post-combustion CO2 capture | Abstract |
| Shaukat Mazari | ||
| 1 - 50 of 245 Items | 1 2 3 4 5 > >> | |